Whole House Generators

Need An Electrician?
(206) 487-7278

"We lost power for two days last winter, and I'm not doing that again." That's the most common thing we hear from Kent homeowners who call us about whole house generators, usually right after a Green River Valley windstorm reminds them how fragile the grid really is.

Phase NW installs standby generators for homeowners across Kent, Auburn, and the surrounding South King County area. We handle generator sizing, load calculations, automatic transfer switch installation, gas line coordination, and permit pulling, every piece of the puzzle. On natural gas? We'll match you to the right unit and kW output rating for your home's electrical load. Same goes for liquid propane. Power outages along the Green River Valley don't wait. Call Phase NW at (206) 487-7278 to schedule a same-day consultation.

Every October, Kent homeowners start watching PSE's outage map like a weather forecast. There's a good reason. The Auburn-Kent corridor runs through the Green River Valley floor, where overhead utility lines take the full force of every atmospheric river that barrels through between October and February. One bad windstorm can stack outages across entire neighborhoods for 18 to 36 hours. Sometimes longer.

That timeline matters more than most people realize.

Live in the 98001 zip code near the valley floor? Then you probably already know about sump pump dependency. The same storm that knocks out your power is dumping water that your basement sump pump can no longer move. Flooding and a power outage arrive together. That's not bad luck, it's a predictable pattern.

For households running CPAP machines, oxygen concentrators, or refrigerated medications, a utility failure isn't an inconvenience. It's a health emergency. The clock starts ticking immediately. And for the growing number of King County residents working from home, an extended outage means lost billable hours and missed deadlines that no blanket and candle can fix.

Here's one people forget: your gas furnace still needs electricity. The blower needs it. The ignition system needs it. A multi-day January outage doesn't just mean cold rooms, it means frozen pipes and burst plumbing. Add a full chest freezer and refrigerator worth of spoiled food, and a single outage can easily cost a household well over a thousand dollars.

Customers in Kent often tell us their only regret is not getting a standby generator installed before the outage that finally pushed them over the edge. If you're already thinking about it, we're happy to walk through your options, reach out at (206) 487-7278 or request a quote online.

Nobody really wants a generator. What Kent homeowners actually want is to ignore the next outage entirely. Stay warm, stay online, keep the sump pump running, and never check that outage map again. Pairing a standby generator with whole-home surge protection gives your electrical system a complete safety net, so the power just stays on while the rest of the neighborhood goes dark.

Here's exactly what happens after you call (206) 487-7278).

Step 1: You call, we schedule fast. We confirm you're in our service area, covering Kent, Auburn, zip codes 98001, 98032, and surrounding South King County, and book a same-day or next-day site visit along the Auburn-Kent corridor. No weeks of waiting.

Step 2: Load calculation and generator sizing. Our electrician inventories your electrical panel, identifies every critical circuit (HVAC, refrigerator, sump pump, lighting) and calculates the actual kW output rating your home needs. "What size generator do I need?" We answer that question with real numbers based on your specific load. No guesswork.

Step 3: Fuel source selection. Most Kent homes connect to PSE's natural gas grid, which gives you a continuous fuel supply with no tank to refill. That makes natural gas the most popular choice for standby generator installation here. No gas service? Liquid propane works just as well.

Step 4: Permits. We pull all permits with the City of Kent or King County, depending on your jurisdiction. This matters more than most homeowners realize, unpermitted generator installs can void your homeowner's insurance. (King County permit jurisdiction) (electrical contractor licensing requirements)

Step 5: Installation day. Concrete pad placement. Generator mounting. Automatic transfer switch installation at your panel, electrical wiring, and gas line connection, all coordinated directly with a licensed gas fitter when required. Nothing falls through the cracks.

Step 6: Testing and walkthrough. We run a full load test and ATS switching test, then walk you through everything: the weekly self-test sound you'll hear, what fault lights mean, and how to respond if something looks off.

Step 7: Inspection and sign-off. We schedule the city or county inspection, make sure it passes, and hand you complete documentation for your records.

Every step stays in our hands. You don't chase subcontractors. You don't pull permits. You don't wonder what's happening next. There's a real difference between hiring a general contractor who subs out the electrical work and hiring Phase NW, we're a dedicated generator installer who owns the process from first call to final inspection. No handoffs. No gaps.

Give us a call at (206) 487-7278 or request your site visit online before the next round of storms rolls through the valley. We'll put together a plan sized right for your home.